TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM
TRAINING SISTEM PRODUKSI MINYAK DAN GAS CANGGIH
TRAINING PRODUCTION EQUIPMENT SUCH AS WELLHEAD
Pembicara / Fasilitator
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB
sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun
1977, kemudian melanjutkan pendidikannya di Diplome d’Etude
Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun
1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide
(Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan
yang berkaitan dengan perminyakan untuk perusahaan di seluruh
Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total,
Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal
Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific
Indonesia, Gulf, Arco, dll.
Topik-topik training yang Beliau sampaikan diantaranya adalah
production surface and down hole equipment, Basic Reservoir
Engineering, Sucker Rod Pumping Theory and Practice, Production
Logging Engineering, Nodal Analysis and Production Optimization, Well
Test, Operation and Interpretation, Well Design, Completion and
Workover, Numerical and Statistical Method for Petroleum Engineering
Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for
Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery,
Applied Reservoir Engineering and Reservoir Simulation, Aspects of
Horizontal Well Technology, Geology and Geophysics Modeling, Advanced
Programming on Numerical Analysis and Industrial Information System,
Management Information System, Well Stimulation of Oil and Gas
Reservoir, Horizontal Well Technology, Transportation of Oil and Gas,
Sand Control Technology, dan lain-lain.
Beliau banyak melakukan penelitian di bidang MIGAS dan telah
mempublikasikan dan menseminarkannya di forum dunia.
ABOUT THE COURSE
The rapidly increasing worldwide demand for natural gas as an energy
source requires expertise in gas engineering technology. Incorporating
a balance between theory and application, course emphasis is on
training participants for immediate application of acquired techniques
to field problems.
Production is defined as the operations involved in bringing well
fluids to the surface and preparing the fluids for transport to a
refinery via pipelines or trucks. The first step in production is to
start the well fluids flowing to the surface (called “well
completion”). Well servicing and workover consists of performing
routine maintenance operations (such replacing worn or malfunctioning
equipment) and performing more extensive repairs, respectively. Well
servicing and workover are an intermittent step and necessary to
maintain the flow of oil and gas. Next, the fluid must be separated
into its components of oil, gas, and water; stored; and treated (for
purification), measured, and tested before being transported to the
refinery.
This training will provide the principle and yet some practical and
theoretical aspect that can be applied on daily work faced by
production engineers and supervisor in the oil industry.
SUBJECT LEARNED
1. All aspects of completions are covered in sufficient detail to
permit participants to review his/her current practices
2. The fundamental concepts of production operations and their proper
application in the field
3. Production equipment such as wellhead, tubing and packers, well
completions and workover as well as well test and problems,
production logging and cementing will also covered
4. Production logs and how and when to use them; evaluation
techniques for cement bond logs and pulse echo tools
BENEFITS
* Learn how to plan and implement well completions, workovers,
stimulation treatments, and routine production operations with an
efficiency that increases profits
* Learn about the role of rock mechanics in completions,
stimulation, and workovers
* Be able to give suggest or discover the procedures and techniques
that increase production and cut operating costs
* Be Able to identify and implement production improvement
opportunities that can be carried out by either rig or non-rig
well interventions
* Implementation of appropriate technology, either from internal or
external sources, in well design, whilst ensuring that the well
value is maximised
COURSE OUTLINE
1. GEOLOGICAL CONSIDERATION
+ Formation Rock
+ Primary and Secondary Migrations
+ Reservoir Traps
2. RESERVOIR FUNDAMENTALS THEORY
+ The Nature of Rocks and Fluids
+ Porosity and Permeability
+ Productivity Index
+ Volumetric Calculation
+ Other Calculations and Decline Curves
3. FLUID FLOW
+ Well Productivity
+ Choke and Reservoir Fluids
+ Inflow and Outflow
4. PRODUCTION OPERATIONS
+ Well head and Well Head Equipment
+ Multiple Orifice
+ Routine Operations
+ Opening and Shut-in Well Procedure
5. WELL TESTING AND SATELLITE SYSTEM
+ Test Separator Operations and Equipments
+ Gas Systems Instruments
+ Flare System and Depressurising
+ Pigging Techniques and Procedures
+ Sampling and Analysis
+ BS & W and API Gravity Measurement
+ Protective Steam Tracing
6. SURFACE PRODUCTION OPERATIONS
+ Process, Level, Temperature and Pressure Controls
+ Oil treating , Heater treater and Dehydrator
+ Separators, Stage Separators and Sizing
+ Two-phase and Three-phase Separation
+ Skimmer tank and Flotation unit
7. WELL PROBLEMS
+ Low Production and Formation Damage
+ Low Reservoir
+ Plug-in Tubing or Perforations
+ High Viscosity
+ High Back Pressure
+ Inadequate Artificial Lift
+ Water Production and Mechanical Problem
+ Protective Steam Tracing
8. PRODUCTION LOGS
9. WELL COMPLETIONS
10. PRIMARY CEMENTING AND SQUEEZE CEMENTING
11. FLUID COMPLETIONS
12. SAND CONTROL
Gravel Pack, Resin and Fraspac
13. WORKOVERS
14. PARAFFIN AND ASPHALTENES
+ Chemical analysis
+ Precipitation Mechanism
+ The wax and Paraffin Problems
15. OIL EMULSIONS
+ Emulsion Built-up and Emulsifying Agent
+ Sampling and Analysis
+ Emulsion Treating
+ Heat and Chemical Treatment
+ Electrostatic Coalescing
16. SCALE PROBLEMS
+ Scale Composition, Prediction and Identification
+ Mechanic and Chemical methods
+ Scale Prevention and Inhibitors
17. CORROSION PREVENTIONS
+ Basic Theory
+ Detection and Measurement
+ Prevention and Material Used
+ Coating and Chemicals
+ Cathodic Protections and inhibitors
Program ini dirancang untuk :
* Production, Operations, Facilities and Senior Petroleum Engineers
* Surface Equipment Technicians, Technical or Reservoir Engineers
* Supervisory Personnel who interact with field facility
engineers/operators
* Production Managers and Field Production Supervisors
* Engineers and other personnel involved with the daily operation
and management of producing oil and gas wells.
JADWAL TRAINING TAHUN 2023
17 – 18 Januari 2023
14 – 15 Februari 2023
20 – 21 Maret 2023
4 – 5 April 2023
16 – 17 Mei 2023
20 – 21 Juni 2023
17 – 18 Juli 2023
15 – 16 Agustus 2023
25 – 26 September 2023
17 – 18 Oktober 2023
21 – 22 November 2023
27 – 28 Desember 2023
Metode Training
- Tatap Muka/offline
- Online via zoom
Kota Penyelenggaraan jika offline :
- Bandung
- Jogjakarta
- Surabaya
- Jakarta
fasilitas yang didapatkan
- Training Kit Eksklusif
- Tas
- Name Tag
- Modul
- Flash disk
- Ballpoint
- Block Note
- Souvenir
- Harga yang Reliable
- Trainer Kompeten di bidangnya
- Pelayanan Maksimal untuk peserta
- Penjemputan dari dan ke bandara
Investasi :
Public training : Rp. 4.500.000 (minimum 3 pax)
In House Training : on Call